https://www.jblmeshbelts.com/videos/spiral-freezer-belt-running-in-spiral-tower https://www.jblmeshbelts.com/assets/web/spiral-freezer-belt/real/jbl-mesh-belt-spiral-freezer-belt-running-in-spiral-tower-20261006-poster.webp Spiral Freezer Belt Running in a Spiral Tower A walk through the tiers of a spiral tower fitted with a stainless steel spiral freezer belt. The video shows the belt laid on every tier, its edges running in the guide rails, and how the tiers sit one above the other around the tower. https://www.jblmeshbelts.com/assets/web/spiral-freezer-belt/real/jbl-mesh-belt-spiral-freezer-belt-running-in-spiral-tower-20261006.mp4 24 2026-10-06T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/self-stacking-belt-stacking-test https://www.jblmeshbelts.com/assets/web/self-stacking-belt/stacking-test/jbl-mesh-belt-self-stacking-belt-stacking-test-video-20261006-poster.webp Self-Stacking Belt Stacking Test Before Shipment A self-stacking spiral freezer belt being stacking-tested before shipment. Each tier rests on the side plates of the tier below; the test shows whether the tiers land and stack evenly on the curve before the belt is packed. https://www.jblmeshbelts.com/assets/web/self-stacking-belt/stacking-test/jbl-mesh-belt-self-stacking-belt-stacking-test-video-20261006.mp4 24 2026-10-06T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/self-stacking-belt-running-in-freezer https://www.jblmeshbelts.com/assets/web/self-stacking-belt/real/jbl-mesh-belt-self-stacking-belt-running-in-freezer-poster-20261003.webp Self-Stacking Belt Running in a Freezer A self-stacking belt running in a freezer. The stacked tiers turn together, each one carried on the side plates of the tier below — the reason a self-stacking freezer needs no drum or tier support rails. https://www.jblmeshbelts.com/assets/web/self-stacking-belt/real/jbl-mesh-belt-self-stacking-belt-running-in-freezer-20261003.mp4 12 2026-10-03T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/spiral-belt-trial-run-walkthrough-malaysia https://www.jblmeshbelts.com/assets/web/cases/malaysia-spiral-belt/jbl-mesh-belt-case-malaysia-spiral-trial-walkthrough-poster-20261006.webp Spiral Belt Trial Run Walkthrough — Shown to the Buyer Before Bulk A walkthrough of a spiral belt trial run made to the buyer's drawing for a project in Malaysia. Welds and rod ends were ground a second time; the video was sent with photos and samples so the buyer could approve the belt before the bulk order. https://www.jblmeshbelts.com/assets/web/cases/malaysia-spiral-belt/jbl-mesh-belt-case-malaysia-spiral-trial-walkthrough-20261006.mp4 22 2026-10-06T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/spiral-belt-sprocket-running-test-waffle-line https://www.jblmeshbelts.com/assets/web/cases/waffle-spiral-cooling/jbl-mesh-belt-case-waffle-spiral-cooling-bulk-sprocket-running-test-poster-20261006.webp Sprockets Running on the Bulk Spiral Belt Before Shipment New sprockets running on the bulk spiral belt for a waffle cooling spiral, before shipment. Both were made from the buyer's own belt section and sprockets; the test checks that the teeth engage the belt cleanly. https://www.jblmeshbelts.com/assets/web/cases/waffle-spiral-cooling/jbl-mesh-belt-case-waffle-spiral-cooling-bulk-sprocket-running-test-20261006.mp4 18 2026-10-06T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/nylon-sprocket-running-match-test-spiral-cooling-belt https://www.jblmeshbelts.com/assets/web/cases/australia-spiral-cooling-2024/jbl-mesh-belt-case-australia-spiral-cooling-sprocket-running-match-test-poster-20261006.webp Nylon Sprocket Running Match Test on a Spiral Cooling Belt Nylon sprockets running on a new spiral cooling belt for a bakery in Melbourne, Australia. The belt and sprockets were replaced together and run together before shipment, so the buyer received a matched pair. https://www.jblmeshbelts.com/assets/web/cases/australia-spiral-cooling-2024/jbl-mesh-belt-case-australia-spiral-cooling-sprocket-running-match-test-20261006.mp4 5 2026-10-06T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/eye-link-belt-sprocket-fit-check https://www.jblmeshbelts.com/assets/web/eye-link-belt/qc/jbl-mesh-belt-eye-link-belt-sprocket-running-poster-01-20261005.webp Eye Link Belt Sprocket Fit Check A stainless sprocket rolled by hand along an eye link belt before shipment. It is a quick fit check: the teeth should seat between the rods all along the belt, with no climbing or gaps. https://www.jblmeshbelts.com/assets/web/eye-link-belt/qc/jbl-mesh-belt-eye-link-belt-sprocket-running-video-01-20261005.mp4 8 2026-10-05T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/balanced-weave-belt-sprocket-engagement-test https://www.jblmeshbelts.com/assets/web/balanced-weave-belt/qc/jbl-mesh-belt-balanced-weave-belt-sprocket-engagement-poster-01-20261005.webp Balanced Weave Belt Sprocket Engagement Test A sprocket fitted by hand into a balanced weave belt before shipment, to check that the teeth seat in the weave openings. https://www.jblmeshbelts.com/assets/web/balanced-weave-belt/qc/jbl-mesh-belt-balanced-weave-belt-sprocket-engagement-video-01-20261005.mp4 6 2026-10-05T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/side-driven-belt-sprocket-fit-check https://www.jblmeshbelts.com/assets/web/side-driven-belt/qc/jbl-mesh-belt-side-driven-belt-sprocket-running-test-poster-20261005.webp Side-Driven Belt Sprocket Fit Check A UHMWPE sprocket turned by hand along the edge of a side-driven belt before shipment. It checks that the teeth engage the belt edge where the drive will act. https://www.jblmeshbelts.com/assets/web/side-driven-belt/qc/jbl-mesh-belt-side-driven-belt-sprocket-running-test-video-20261005.mp4 4 2026-10-05T08:00:00+08:00 yes https://www.jblmeshbelts.com/videos/self-stacking-belt-turning-test-uk https://www.jblmeshbelts.com/assets/web/cases/uk-self-stacking-oem/jbl-mesh-belt-case-uk-self-stacking-turning-test-poster-20261007.webp Self-Stacking Belt Turning Test — 450 m OEM Replacement for the UK A walk around a self-stacking belt laid out in a full circle — the turning test run before bulk production of a 450 m OEM replacement belt for a customer in the United Kingdom. The test checks that the mesh closes evenly on the inside edge and the side plates follow the radius. https://www.jblmeshbelts.com/assets/web/cases/uk-self-stacking-oem/jbl-mesh-belt-case-uk-self-stacking-turning-test-20261007.mp4 15 2026-10-07T08:00:00+08:00 yes