Edge Styles — What the Edge Does on a Metal Conveyor Belt
16 pages · flip through online · tap the right half for the next page

What you will find in this book
Six edge types on real projectsRead on your belt or drawing. Any edge change is confirmed before production.Open page 2 →
Where the edge touches your lineDrive, guides and turn meet the edge.Open page 3 →
Clenched edge — kept as on the sampleAustralia: the edge was read on the sample and kept.Open page 4 →
Washer-welded edge — to the OEM drawingUSA: bend radii and edges checked on the trial against the drawing.Open page 5 →
Chain edge with guide rollersAustralia: chain read on the sample, then on the trial.Open page 6 →
Roller-chain edge on an eye link beltSpain: 50 mm pitch roller-chain edge, read on the bulk belt.Open page 7 →About this document
Edge Styles: What the Edge Does on Your Line — a 16-page technical guide book from JBL Mesh Belt, to read online or download as PDF.
The edge meets the drive, the guides or the drum. Six edge types, each shown on a real project with its readings.
Clenched · washer-welded · chain · roller-chain · edge loop · spiral edge links.
Photos and readings come from published JBL Mesh Belt projects; customers are not named.
Edge loop changed only by drawing
| Item | Original | Drawing | Bulk |
|---|---|---|---|
| Edge loop | 10.00 | 9 | 9.02 |
| Wire | 1.80 | 1.8 | 1.81 |
| Pitch | 12.70 | 12.7 | 12.70 |
1 in = 25.4 mm. SUS304. See page 8 →
Questions this document answers
+Can the original edge be kept?
Yes; the Australia can washing edge was kept.
+Can the edge be changed?
Any edge change is confirmed before production — see page 8.
+How is the edge checked?
On the waffle line and Malaysia projects: trial run and bulk belt, with photos and readings.
+Which edge for my line?
Depends on drive, guides and product; send photos.
Edge Styles: What the Edge Does on Your Line
The edge meets the drive, the guides or the drum. Six edge types, each shown on a real project with its readings.
Read on your belt or drawing. Any edge change is confirmed before production.
Send your drawing, old-belt photos or required dimensions. We read the edge with you before the quotation.
