Building new equipment
You send: layout, product and drive.
You get: a belt specification fixed with your engineers.
Engineering-Controlled Metal Conveyor Belt Partner
Spiral, Self-Stacking and Replacement Metal Conveyor Belts — Reviewed Against Your Equipment Before You Order
JBL Mesh Belt supports food processing plants, OEMs and distributors in replacing spiral freezer, self-stacking and eye link conveyor belts with or without the original drawing. Send an old belt photo, belt section, drawing or equipment details, and JBL reviews the belt-specific critical dimensions and equipment compatibility before quotation. Depending on the belt type and project requirements, verification may include sample matching, drum tests or stacking tests before shipment.
JBL Mesh Belt is the metal conveyor belt brand of Jin Bei Li Metal (Suzhou) Co., Ltd., an Engineering-Controlled Metal Conveyor Belt Partner. We review your drawing or old belt, confirm the specification in writing, inspect the belt before shipment and keep one point of contact from enquiry to delivery.
Reviewed against your equipment
before quotation
Sample approved by you
before bulk production
Drum / stacking test video
before shipment
Send your drawing or old-belt photos
on WhatsApp or by email
01
Start here
What Brings You Here?
Replacing a worn belt — will the new one fit?
Same width and pitch is not enough — we check 12 points first. Old belt photos or a sample are enough to start.
Check my old beltRe-ordering the same belt
You send: your last order or specification.
You get: the same belt, checked against your order history.
02
Belt range
Find Your Belt — and the Question That Decides It
Spiral Freezer Belt
For spiral freezing, IQF and continuous cooling
Buyers ask: Standard or small radius — which turn ratio?
Specs, drawings & QC →
Self-Stacking Belt
Buyers ask: CW or CCW? Which tier height?
Specs, stacking test & QC →
Eye Link Belt
Buyers ask: Will the chain edge fit my sprockets?
View belt →
Side-Driven Belt
Buyers ask: Side drive or edge drive — how do I tell?
View belt →
Flat Wire / Honeycomb Belt
Buyers ask: Open area or product support — which matters more?
View belt →
Chain-Driven Belt
Buyers ask: Does the chain pitch match my sprockets?
View belt →03
Engineering evidence
Engineering Evidence You Can Check Before Shipment
We review the belt against your equipment before the specification is confirmed — and you see each step, not just a promise.
STEP 1
Your belt is measured
Pitch, wire and rod read on a caliper — from photos, a sample or a drawing.
STEP 2
Joined to your sample
A new section is connected to your original to check pitch, links and edge.
STEP 3
You see it tested
Drum or stacking test photos and video before the crate is closed.
STEP 4
Shipping list on the crate
Key dimensions listed, so your team can check on arrival.
ROD PITCH
19.05 mm · 0.750 in
WIRE Ø
1.5 mm · 0.059 in
WIDTH
421 mm · 16.57 in
Readings are examples from projects.
04
Real footage
Running and Stacking Tests
Have a similar belt? Send one photo — we tell you what needs to be checked.
Send a Photo05
Buyer feedback
What Buyers Say After the Belt Is Running
On the belt
After installation and in service
Spiral Freezer Belt
After installation
“So far everything is good, the installation went well and it runs very well. Everyone was impressed with the quality and shine…”
Spiral Freezer Belt
Repeat order
“Yes the belt has been performing very well apparently, always good to hear. Thanks for the quote, the order will follow soon.”
Balanced Weave Belt
Spare set requested
“…has fitted one belt so far & seem really happy with it. Said it felt much heavier duty… Do you have enough material to make another set of these?”
Compound Weave Belt
After-sales follow-up
“So far, the feedback from the customer is positive and he has no comments/observations.”
On working with us
Specifications, samples, communication and delivery
Chain-Driven Belt
Long-term buyer
“JBL’s product range, quality and excellent communication make doing business simple and stress free.”
Compound Weave Belt
Specification review
“What a fantastic job in presentation of the belt specifications, well done.”
Eye Link Belt
Samples and enquiry
“I want to say a big thank you for your good customer service and quick support for the product samples and enquiry.”
Flat Wire / Honeycomb Belt
On arrival
“All received well. Good packaging box…, we do like that one.”
Quoted word for word from buyer emails. Sender names, companies and contact details are removed.
06
Buyer concerns
What Buyers Worry About — and What We Do About It
“Will the new belt fit my machine?”
Drum, turn ratio, direction, drive and sprockets are reviewed before the quotation.
“Do I need to change my drive?”
Drive engagement and sprockets are checked first. If a change is needed, you know before quoting.
“Will it reduce downtime on my line?”
A mismatched belt is a common cause of stops — verification and a test before shipment reduce that risk.
“Will I receive what I approved?”
Inspection data and video at trial production and again before shipment.
“Will I know where my order is?”
Open orders get a status every Thursday: stage, done, pending, next step.
“Will the re-order match the last one?”
Repeat orders start from your order history, not from zero.
Project case · anonymized
Weld burrs on a spiral freezer belt: from hidden risk to controlled replacement
Problem found → engineering review of where burrs appear under load → weld finishing and burr review before delivery.
07
FAQ
Questions Buyers Ask Before Replacing a Belt
Q1Can a belt with the same width and pitch replace my existing spiral belt?
Not by itself. Drive engagement, inside radius, link geometry, turn ratio and running direction must also match your system.
Q2What should I measure before replacing a spiral freezer belt?
Width, rod diameter and pitch, link pitch, wire diameter, turn ratio, inside radius, drive and sprocket details. For self-stacking belts also tier height and CW / CCW direction.
Q3Can you replace my belt without the original drawing?
Yes. From an old belt sample or photos with measurements, confirmed with a sample you approve before production.
Q4Do I need to change my drive system?
This is checked first. If the belt matches your drive engagement and sprockets, no change is needed; if a change is needed, we tell you before quoting.
Q5Side drive or edge drive — how do I tell which spiral belt I have?
Look at where the drive engages the belt: on the inside edge links or on the side. A photo of the belt edge on the drum is usually enough for us to tell.
Q6What determines how long a self-stacking belt lasts?
Rod and link wear, pitch elongation, drive engagement, load, temperature and cleaning. Service life depends on your operating conditions.
Q7Which lines is a spiral freezer belt used on?
Spiral freezing, rapid freezing (IQF) and continuous cooling conveyors. Belt structure and material are confirmed against your equipment and operating temperature.
Q8What is the fastest way to start?
Send your drawing or old-belt photos on WhatsApp +86 138 1487 2506. WhatsApp is fastest.
Not sure what to send? Start with what you have.
Even one photo of the old belt is enough. Spring Liu, Sales Director, or an engineer checks it against your equipment and tells you what fits, what is still needed and the next step. No obligation to order.
08 · Send inquiry
Send a photo, a drawing or old belt dimensions.
An engineer tells you what fits, what is missing and the next step.
Document Library
Check the specification before you order or replace a belt
Compare pitch, wire, edge, surface and sprocket options with your equipment before you send a drawing or old-belt photos. 13 technical specifications and 11 production and quality control documents for JBL Mesh Belt metal conveyor belts and sprockets, page by page on your phone or computer.
Open the Document Library →Page by page in your browser · no sign-upTechnical Specifications13Production & Quality Control11Project CasesVideosBuyer Guides
Technical Specification
Spiral Freezer Belt
Production & Quality Control
Self-Stacking Belt
Technical Specification
Sprockets
Engineering review
Not sure which specification fits your line?
Send your drawing or old-belt photos on WhatsApp. We compare them with the specification and tell you what still needs to be measured.