Project cases

Real Replacement and New-Line Projects

Each case shows the problem, what was measured, the sample next to the original and the shipment — with real project photos. Country, city and year only; customers are not named.

Chain-driven belt edge with roller chain, cotter pins and blue guide rollers

Australia · 2023

Chain-driven belt with 316 mesh for a steam oven tunnel in Australia — reverse-engineered from the customer's sample

From a sample of the original belt we measured the chain and the mesh, made a trial chain with guide rollers, then about 33 m of belt with SUS316 mesh and rods and a SUS304 chain.

Chain-Driven Belt · Steam oven tunnel

Clenched edge of a flat wire belt sample for a can washing line

Australia · 2022

316 / 316L flat wire belt for a can washing line in Australia — reverse-engineered from the customer's sample

The customer sent a section of the original belt. We measured pitch, rod and strip, matched the clenched edge, and supplied about 61 m with SUS316 rods and SUS316L flat strips.

Flat Wire Belt · Can washing line

Z-type ladder belt laid on support bars for checking before packing

Libya · 2025

Z-type ladder belt for a potato chip frying line in Libya — copied from the original sample, drawn, trial-checked, then 50 m

The original equipment maker's replacement price was high. From the customer's sample we drew the belt, compared a trial length with the original, then made 50 m in SUS304.

Z-Type Ladder Belt · Potato chip frying line

Z-type ladder belt roll and a laid-out length for pizza ovens

Australia · 2025

Z-type ladder belts for pizza ovens in Australia — about 300 m in 10 m lengths, one length per oven

From the customer's original belt we drew the belt, matched wire and pitch, and supplied about 300 m in SUS304, cut into 10 m lengths for pizza ovens.

Z-Type Ladder Belt · Pizza ovens

Self-stacking belt laid out in a full circle for the turning test

United Kingdom · 2026

450 m self-stacking belt for a UK line — copied from the OEM sample, turn- and stack-tested, then bulk

The OEM's replacement belt was too expensive. From the customer's sample: dimensions measured, sample compared, approved, then turning and stacking tests before 450 m.

Self-Stacking Belt · OEM replacement belt

Flat wire honeycomb belt with washer-welded edge, laid flat

USA · 2024

About 700 m of flat wire belt for onboard fish freezing in the USA — built to a strict drawing, with clips and sprockets

Replacing an OEM belt from a well-known American equipment maker. Drawing and original sample checked, trial run checked for tight radii and no burrs and approved — then clips, flight bars and sprockets too.

Flat Wire / Honeycomb Belt · Onboard fish freezing (fishing vessels)

Eye link belt sample sections with flat-link edges laid out for checking

Spain · 2026

New eye link belts for a shrimp IQF tunnel line in Spain — drawn, sampled, approved, then built

No sample to copy: requirements turned into drawings, a physical sample checked on the customer's line, then about 100 m of belt.

Eye Link Belt · Shrimp IQF tunnel freezing

Spiral belt laid out in a full circle for the turn test

Malaysia · 2026

Small radius spiral belt replacement in Malaysia — trial run approved from photos, turn-tested, then about 130 m bulk

Drawing prepared from the customer's data and confirmed before production. Trial run photographed and samples sent; welds ground smooth; belt laid out in a full circle to check the turn before bulk.

Small Radius Spiral Freezer Belt · Small radius spiral belt replacement

Self-stacking belt tiers stacked on a curve during the stacking test

Brazil · 2025

Self-stacking freezer belt for a meat plant in Brazil — trial run first, then 350 m, then a repeat 350 m

Copied from the customer's original belt, joined to it and stacking-tested. About 50 m run on the freezer first; the 350 m order followed, then a second 350 m.

Self-Stacking Belt · Meat freezing

Customer's original spiral belt measured with a tape

2026

Spiral belt and sprockets for a waffle cooling spiral — reverse engineered from the customer's belt

Original spiral built by another equipment maker. Belt and sprockets measured, trial run compared with the original and approved from photos before bulk.

Spiral Belt · Waffle spiral cooling

Spiral cooling belt carrying bakery products on the customer's line

Australia · Melbourne · 2023–2024

400 m spiral cooling belt, made from the customer's sample

Bakery in Melbourne. Belt and sprockets from the customer's sample, pitch, rod and link matched with a caliper, sprocket run-tested before shipment.

Spiral Belt · Bakery spiral cooling