Belt matched to your drawing
Width, pitch, drum or sprocket geometry, direction and tiers checked against your machine drawing before the belt is quoted.
Checked first: Machine drawing · Drum, turn ratio and drive · Tiers and direction

If you build spiral freezers, tunnel freezers, ovens, fryers or conveyor systems, the belt is part of your design. We confirm it against your drawing, supply belts and sprockets matched together, and keep the specification the same on every repeat order.

The belt is matched to your design before production — not after installation at your customer's site.
Width, pitch, drum or sprocket geometry, direction and tiers checked against your machine drawing before the belt is quoted.
Checked first: Machine drawing · Drum, turn ratio and drive · Tiers and direction

Sprockets, wear strips, flights and side plates supplied with the belt, matched to its pitch.
Checked first: Pitch and teeth · Bore and keyway · Accessories

A sample is approved before production; for spiral and self-stacking belts the drum or stacking test is filmed before shipment.
Checked first: Sample approval · Drum or stacking test · Readings and photos

Each order follows the recorded specification, previous shipment photos and special requirements — so machine number ten gets the same belt as machine number one.
Checked first: Recorded specification · Previous shipment photos · Special requirements

Machine drawing
Layout, drum or sprocket geometry and belt path.
Product and process
Product, temperature and cleaning on the end user's line.
Belt specification
Width, pitch, edge, material — or let us propose one for review.
Drive
Sprockets, drums, wear strips and guides.
Quantities
Per machine and per year, so specifications can be recorded.
Documents
Material and export documents needed for your customers.
Replacing a belt, or fitting out a new line?
Send photos with a tape in the picture, a drawing or an old belt section. An engineer tells you what fits and what is missing.




Yes. Belts and sprockets are supplied to equipment builders and confirmed against their drawings.
Yes. Send the drawing, product and process; a belt specification is proposed for your review.
Each order follows the recorded specification, previous shipment photos and special requirements.
Yes — sprockets, wear strips, flights and side plates matched to the belt.
Yes. Replacement belts are checked against your original specification.
Send your drawing or old-belt photos on WhatsApp +86 138 1487 2506. Commercial terms are confirmed in writing in the quotation.