Chain-Driven Belt — Project Case: A Steam Oven Belt Copied From a Sample
14 pages · flip through online · tap the right half for the next page

What you will find in this book
Sample, custom chain, trial chain, beltNon-standard chain: measured and trialled before the belt.Open page 2 →
Australia · steam oven tunnel · about 33 mSteam, acid and alkaline cleaning; the belt rides on a side chain.Open page 3 →
What each reading on the sample decidesThe chain was not a catalogue part, so it was read as closely as the mesh.Open page 4 →
Chain and mesh read on the sampleThe dimensions that decide fit on the sprockets and guides.Open page 5 →
A trial chain before the beltPlates, rollers and guide rollers checked against the sample.Open page 6 →
Sample against the new beltReadings from the photos and the shipping specification.Open page 7 →About this document
Chain-Driven Belt: A Steam Oven Belt Copied From a Sample — a 14-page project cases book from JBL Mesh Belt, to read online or download as PDF.
One real project: the chain and mesh read on the customer's sample, a trial chain made first, then the belt.
Australia · 2023 · steam oven tunnel · about 33 m, shipped by air.
Photos and readings come from published JBL Mesh Belt projects; customers are not named.
Sample against the new belt
| Item | Sample | New belt |
|---|---|---|
| Chain pitch | 31.75 | 31.75 |
| Chain roller | 19.05 | 19.05 (spec) |
| Chain plate | 2.00 | 2.00 |
| Rod | 7.00 | 7.00 |
| Mesh pitch | 8.50 | 8.50 |
Values in mm. 31.75 mm = 1¼ in; 19.05 mm = ¾ in. See page 7 →
Questions this document answers
Chain-Driven Belt: A Steam Oven Belt Copied From a Sample
One real project: the chain and mesh read on the customer's sample, a trial chain made first, then the belt.
Non-standard chain: measured and trialled before the belt.
Send your drawing, belt and chain photos, or a sample. We read the chain and the mesh with you before the quotation.



