Spiral Freezer Belt — Project Cases: Replacing a Spiral Belt Without the Original Drawing
15 pages · flip through online · tap the right half for the next page

What you will find in this book
Starting from a worn belt sectionNo drawing: both projects started from a section of old belt.Open page 2 →
Appearance alone does not confirm fitProblems that come up when a spiral belt is replaced.Open page 3 →
Read on your belt, not copied from a catalogueFive things decide whether a new belt runs on your spiral.Open page 4 →
Australia · bakery cooling spiral · about 400 mNo drawing: a worn section of the original belt was sent.Open page 5 →
Sample checked against the originalThe sample was read with the same tools.Open page 6 →
Checked before the crates were closedThe nylon sprockets were measured and run on the new belt.Open page 7 →About this document
Replacing a Spiral Belt Without the Original Drawing — a 15-page project cases book from JBL Mesh Belt, to read online or download as PDF.
Two real projects: what the buyer sent, what was measured, and what was checked before shipment.
Australia · bakery cooling · about 400 m Waffle cooling · about 200 m + sprockets.
Photos and readings come from published JBL Mesh Belt projects; customers are not named.
Sample checked against the original
| Item | Original | New sample |
|---|---|---|
| Pitch | 27.41 mm | 27.40 mm |
| Rod diameter | 5.03 mm | 5.00 mm |
| Link thickness | 2.70 mm | 2.70 mm |
Bulk production started only after the sample was compared. 1 in = 25.4 mm. See page 6 →
Questions this document answers
Replacing a Spiral Belt Without the Original Drawing
Two real projects: what the buyer sent, what was measured, and what was checked before shipment.
No drawing: both projects started from a section of old belt.
Send your old-belt photos, drawing or required dimensions. We review the fit dimensions with you before you order.



