Flat Wire / Honeycomb Belt — Project Cases: A Strict OEM Drawing and a Sample-Only Replacement
15 pages · flip through online · tap the right half for the next page

What you will find in this book
Drawing or sample, read before bulkBoth projects: fit read before bulk; the USA trial was checked against the drawing.Open page 2 →
What decides fit on a flat wire beltRead on the original or drawing, again on the bulk belt.Open page 3 →
USA · fishing-vessel conveyors · about 700 mReplacing OEM belts: a detailed drawing and the original sample.Open page 4 →
Why the drawing and the original sample were used togetherThe drawing gave the targets. The sample showed how the original was formed.Open page 5 →
Drawing requirements, checked on the trial runTrial checked against the drawing, approved before bulk.Open page 6 →
Bulk belt read again before packingReadings on the finished rolls, five widths.Open page 7 →About this document
Flat Wire / Honeycomb Belt: Two Projects, Two Starting Points — a 15-page project cases book from JBL Mesh Belt, to read online or download as PDF.
One belt built to a strict OEM drawing, one copied from a customer's sample — what was read, checked and supplied.
USA · fishing vessels · about 700 m Australia · can washing · about 61 m.
Photos and readings come from published JBL Mesh Belt projects; customers are not named.
Sample readings to specification
| Item | Sample | Belt supplied |
|---|---|---|
| Pitch | 25.41 | 25.4 (spec) |
| Cross rod | 2.97 | 3.00 |
| Flat strip | 1.21 × 9.50 | 1.2 × 9.5 |
| Edge | Clenched | Clenched |
| Material | Stainless | SUS316 / 316L |
1 in = 25.4 mm. SUS316 rods, SUS316L strips. Two rolls. See page 12 →
Questions this document answers
Flat Wire / Honeycomb Belt: Two Projects, Two Starting Points
One belt built to a strict OEM drawing, one copied from a customer's sample — what was read, checked and supplied.
Both projects: fit read before bulk; the USA trial was checked against the drawing.
Send your drawing, old-belt photos or a section of the original. We read the fit dimensions with you before the quotation.



