Z-Type Ladder Belt — Project Cases: From the Original Belt to Rolls and Fixed Lengths
15 pages · flip through online · tap the right half for the next page

What you will find in this book
Original belt, drawing, comparison, rollsBoth belts were drawn from the customer's original before production.Open page 2 →
What decides fit on a Z-Type Ladder BeltPitch, wire, spaces across the belt and the edge loop.Open page 3 →
Five readings, and how each is taken on an old beltWith these values a drawing can be made, even without the original maker.Open page 4 →
Libya · potato chip frying line · 50 mReplacing the OEM belt, from a sample of the original.Open page 5 →
Why the pitch is read over ten linksOne link can read right while the belt drifts. Ten pitches show it.Open page 6 →
Drawing against the caliperA trial length was compared with the original before the 50 m.Open page 7 →About this document
Z-Type Ladder Belt: Copied From the Original, Checked Over Ten Pitches — a 15-page project cases book from JBL Mesh Belt, to read online or download as PDF.
Two projects started from the customer's belt — what was read, drawn, compared and supplied.
Libya · frying line · 50 m in 10 m rolls Australia · pizza ovens · about 300 m in 10 m lengths.
Photos and readings come from published JBL Mesh Belt projects; customers are not named.
Drawing against the caliper
| Item | Drawing | Caliper |
|---|---|---|
| Pitch | 8 | 8.00 |
| Ten pitches | 80 | 80.04 |
| Wire | 1 | 1.00 |
| Spaces | 19 | 19 |
| Edge loop | 5 | 5.00 |
1 in = 25.4 mm. SUS304. See page 7 →
Questions this document answers
Z-Type Ladder Belt: Copied From the Original, Checked Over Ten Pitches
Two projects started from the customer's belt — what was read, drawn, compared and supplied.
Both belts were drawn from the customer's original before production.
Send your drawing, old-belt photos or a sample of the original. We read pitch, wire, spaces and edge loop with you before the quotation.



