Application · Seafood and IQF Freezing

Conveyor Belts for Seafood and IQF Freezing: Shrimp, Fish Fillets and Shellfish

Seafood is frozen in spiral and tunnel freezers, then cooked, cooled or washed on open belts. The belt follows the freezer and the product: drum and turn ratio for spirals, open area and support for tunnels, and a material that stands up to salt water and washdown.

Shrimp on a stainless steel conveyor belt
Freezers
Spiral, self-stacking, tunnel / IQF
Products
Shrimp, fish fillets, shellfish, seafood mixes
Material
SUS304 / SUS316 by product and cleaning
WhatsApp
Send your drawing or old-belt photos
01
Lines and belts

Which Belt for Each Seafood Line?

Start from the line: spiral freezer, tunnel freezer, cooker or washer. The belt type follows; then width, pitch, edge and drive are checked against your equipment.

Spiral freezing

Spiral freezer belts for drum-driven spirals; self-stacking belts for self-stacking freezers. The belt is matched to the drum, turn ratio and running direction.

Checked first: Drum diameter and turn ratio · CW / CCW and tier height · Sprockets

Cooking, cooling and pasteurizing

Open eye link belts carry product through cookers, coolers and pasteurizers; material is chosen for water, steam and cleaning chemicals.

Checked first: Water or steam and chemicals · Belt length and load · Material grade

03
Checked before quoting

What Is Checked Before a Seafood Line Belt Is Quoted

Freezer and drive

Spiral drum diameter, turn ratio and direction, or tunnel length, width and drive.

Product and support

Piece size and weight decide open area and how close the surface must be.

Salt water and cleaning

Material grade chosen for brine, washdown and cleaning chemicals.

Edge and sprockets

Edge type and sprocket pitch confirmed against your machine.

Old belt, if replacing

Measured photos or a section of the old belt compared with the new one.

Documents

Material documents prepared as required for the order.

Replacing a belt, or fitting out a new line?

Send photos with a tape in the picture, a drawing or an old belt section. An engineer tells you what fits and what is missing.

Spiral cooling and freezing

Spiral Cooling and Freezing: Which Spiral Belt Does Your Seafood Line Need?

Spiral coolers and spiral freezers on seafood lines both wind the belt round a drum, tier after tier. The belt is chosen from three things on your spiral: how tight the turn is, how the drive moves the belt, and the product it carries.

The published reference range for standard spiral freezer belts starts at a turn ratio of 1.15. A spiral that turns tighter needs a Small Radius Spiral Freezer Belt, with the turn ratio confirmed against your drum. Before shipment, the belt is turned on a test drum matched to your drum diameter and turn ratio, and you receive photos or video.

Your spiralBelt to reviewCheck firstIf you are replacing
Standard turn, drum-driven spiral cooler or freezerSpiral Freezer BeltDrum diameter, turn ratio, running direction, tier heightPhotos of the edge and drive side; sprocket condition
The spiral turns tighter than a standard belt allowsSmall Radius Spiral Freezer BeltTurn ratio confirmed against your drum; inner and outer pitchInner and outer pitch measured on the old belt
Sprockets drive the belt at its side linksSide-Driven BeltRod pitch measured on the old belt; sprocket pitchSprocket photos with tooth count, bore and keyway
The belt already runs badly on your spiralCheck the drive and the belt before orderingTracking, tooth engagement, lifting at the turnPhotos of where the drive meets the belt

Line by line

Seafood and IQF Belts: Line, Belt Type and What to Check

IQF means individually quick frozen: pieces freeze separately instead of in a block. A tunnel freezer does this on a straight belt, a spiral freezer on a belt running through tiers. The freezer type decides the belt type, and the piece size decides how close the surface must be.

LineUsual belt typesCheck firstIf you are replacing
Spiral freezerSpiral Freezer Belt, Self-Stacking BeltDrum diameter, turn ratio, direction, tier heightPhotos of edge and drive side; sprocket condition
Tunnel and IQF freezerEye Link Belt, Flat Wire / Honeycomb Belt, Balanced Weave BeltPiece size, open area against support, edge and drivePitch and rod pitch measured on the old belt
Cooker, cooler, pasteurizerEye Link Belt, Balanced Weave BeltWater or steam, chemicals, belt length and loadMaterial of the old belt, if documented
Washing and drainingFlat Wire / Honeycomb Belt, Z-Type Ladder BeltOpenings or spaces, edge type, widthOpenings or spaces counted on the old belt

Replacing a seafood line belt

What to Send for a Seafood or IQF Belt

  • Freezer or line type: spiral, tunnel, cooker or washer.
  • Photos of the old belt: the edge, the drive side and a close-up of the mesh.
  • Belt width and overall length, or tunnel length and width.
  • Product and piece size, salt water or brine, and how the line is cleaned.
  • For spirals: drum diameter, turn ratio and running direction, if you have them.
04
Evidence

What You See Before Your Belt Ships

Measured with a caliper
Measured with a caliper
Stacking-tested before shipment
Stacking-tested before shipment
New belt joined to the customer's sample
New belt joined to the customer's sample
Packed with a shipping list
Packed with a shipping list
How we work, from inquiry to repeat order →
05
FAQ

Questions Buyers Ask

Q1Which belt is used in a seafood spiral freezer?

A spiral freezer belt for drum-driven spirals, or a self-stacking belt for self-stacking freezers. Drum diameter, turn ratio and direction decide the fit.

Q2Which belt for an IQF tunnel freezing shrimp?

Usually an eye link belt for strength and airflow; a flat wire or balanced weave belt where small pieces need closer support.

Q3SUS304 or SUS316 for seafood?

It depends on salt water, brine and cleaning chemicals on your line. The grade is confirmed per project.

Q4Can you replace the belt on our existing freezer?

Yes. Send measured photos or a section of the old belt; the new belt is checked against it and the drum before quoting.

Q5Do you supply the sprockets?

Yes — matched to the belt pitch and checked with the belt.

Q6What is the fastest way to start?

Send your drawing or old-belt photos on WhatsApp +86 138 1487 2506. Commercial terms are confirmed in writing in the quotation.